JMOD Hardware Kit

$150.00

Addon that includes all hardware required to assemble 1 (one) JMOD multiple entry horn in the tri-amped configuration.

Packaged in environmentally sustainable materials.

Consumables like glue, filler, sandpaper, etc. are not included.

Handles:

Addon that includes all hardware required to assemble 1 (one) JMOD multiple entry horn in the tri-amped configuration.

Packaged in environmentally sustainable materials.

Consumables like glue, filler, sandpaper, etc. are not included.

Part Quantity
Penn Elcom® 1105 Handle 2
Penn Elcom® H1105G Handle Gasket 2
Neutrik® NL8MPR Speakon Connector 2
Foam gasketing tape 3/8" width 6 feet
10-24 stainless tee nut 8
1/4-20 stainless tee nut 12
#4x1/4 stainless wood screw 8
#8x3/4 stainless pan head screw 21
10-24x1.25 stainless fastener, philips panhead 8
1/4-20x1.5 stainless fastener, socket panhead 2
1/4-20x1 stainless fastener, socket countersunk 10
M6x16MM stainless flanged hex head bolts 4
1/4" washer, stainless 2
Cable tie down 1
Belden® 9497 twisted pair 16ga wire 4 feet
Shrinkflex® 1/4" 3:1 heat shrink tubing 1.5 feet
Neutrik® Faston connectors 16